Body material: Aluminum(GB-ADC12)+PC(Japan Brand)
Power supply: USA Brand High Efficient Solar Panel
Battery: NI-MH1.2V/600MAH; Lithium battery3.2V/500MAH(Made in Japan);
Resistance: >30T
LED Color: White, Yellow, Blue, Red, Green
Size: L125mm*W107mm*H26+50mm
Body material: Casting Aluminium alloy +PC
Power supply: 5V/80MAH Mono crystalline silicon
Battery: Lithium battery3.2V/1000MAH
Resistance: >40T(can be installed in the middle of road)
LED Color: White, Yellow, Blue, Red, Green
Size: φ125*50mm
Body material: Hi-pressure Casting Aluminium alloy
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Battery: NI-MH 1.2V/800MAH or lithium battery
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: L104*W104*H20mm
Body material: ABS
Filling: Epoxy+Quartz
Lens Material: PMMA
Colors: White, Red, Yellow, Green, Blue
Size: 100*100*18mm
Body material: ABS
Reflector type: Double side/Single side
Lens Material: PMMA
Colors: White, Red, Yellow, Green, Blue
Size: 116*82*18mm
Body material: Aluminium
Filling: Epoxy+Quartz
Lens Material: PMMA
Colors: White, Red, Yellow, Green, Blue
Size: 100*100*20+50mm
Sep 04, 2015 · Ministers are prepared to amend traffic legislation to allow a new generation of LED road studs to be used on British roads which can be seen up to 1,000 yards ahead, 10 times further than cats eyes.
Dec 08, 2006 · If anyone ever read the highway code on motorway rules, they would know that the slip road is there for them to adjust their speed to join the flow of traffic on the motorway. As an HGV driver I drive down to Dublin every day from Belfast and if you think that motorway drivers are bad in England try driving down south (Eire).
High-tech road markings are being used in a bid make roads safer in Europe as Patrick Smith reports Intelligent road studs are being installed on two of the busiest sections of the main roads heading towards the port of Dover in County Kent, south-east England.
5 Reasons Bikers Should Know About Reflective Studs. Reflective studs are increasingly being used on high-speed motorways and busy carriageways especially in poorly lit areas to allow easy visibility of the various lane demarcations. Also known as cat's eyes, these road studs were recently introduced in almost all standard roads around the world.
The most common coloured road studs are: White studs; White studs are used to denote lanes on motorways, as well as the dashed centre lines on single carriageways. They are perhaps the most common and visible form of road stud. Red studs; Red studs mark any line which should not be crossed by a vehicle.
ROAD STUDS AT CROSSINGS . 6.15 Road studs to diagram 1055.1 or 1055.2 used to mark a crossing place must be coloured white, silver or light grey (regulation 11(4)). They may not be fitted with reflective lenses or with a steady or intermittent light source, but may be formed from retroreflecting material.
Keep yourself clued in so you stay legal on the motorway. Driving on the motorway is a rite of passage for many. That may be a thing of the past now that learner drivers will be allowed to grace our M-roads. Nevertheless, the motorway is still the road-of-choice for commuters and holidaymakers alike.
Raised road markers typically reflect vehicle headlights, designating a path for drivers during low light conditions. Non-reflective road markers enhance and sometimes replace painted highway lines. Certain road markers alert drivers of errant lane changes with loud noise and vibration when in contact with vehicle tires.
Mar 19, 2008 · The “smart” studs have been fitted to a 3 kilometre stretch of Scotland’s busiest motorway, linked with traffic speed collection data to provide feedback to road users of approaching hazards.
Reflective road studs installed on the motorways can not only be applied on motorway, and it can also be applied in other road conditions to mark the center lines, lane lines and edge lines; it can also be used to mark the curve, ramp entrance, guide line, narrow roads, and road obstructions in dangerous sections with quite strong traffic
High Quality Green On Motorway Temporary Retro Reflective Road Studs , Find Complete Details about High Quality Green On Motorway Temporary Retro Reflective Road Studs,Green Studs On Motorway,Temporary Road Studs,Retro Reflective Road Studs from Traffic Warning Products Supplier or Manufacturer-Yongkang Nuova Industry & Trading Co.,NOKIN Traffic
Cables under the road surface connect them to traffic lights through a nearby automatic controller unit. The Cleaview Intelligence-supplied studs can be visible up to 1,000 metres away – far greater than traditional reflective cat’s eyes – and have been proven to help stop drivers drifting between lanes, reducing the risk of collisions.
While reflective road studs remain the most popular form of road studs, there are other options depending on your circumstances. These include non-reflective studs and markers such as those marking pedestrian crossings, as well as solar-powered road studs, which can provide a similar level of light at a greater distance than cat’s eyes.
Aug 29, 2007 · 111: Reflective road studs may be used with white lines. * White studs mark the lanes or the middle of the road. * Red studs mark the left edge of the road. * Amber studs mark the central reservation of a dual carriageway or motorway. * Green studs mark the edge of the main carriageway at lay-bys, side roads and slip roads. see source below
Marks the left edge of the road, showing that you should not cross the line. GREEN: Marks the edge of the carriageway where there are slip roads, parking bays and bus stops. WHITE: Marks the lanes or the middle of the road. AMBER: Marks the central reservation of the road, making you aware that you are on the extreme right lane available.